Grows With You
Wireless (WIFI) Conference System
New Generation Fully Digital Wireless (Wifi) Conference System
Traditionally, most devices are connected via cables which is time wasting and cumbersome. But with the new EIKI Wireless (WIFI) conference system, digital wireless (WIFI) technology brings meetings to a new era, making hosting meetings more efficient and smooth.
Using Wireless (WIFI) technology to co-work perfectly with existing networks
EIKI wireless unit, chooses the frequency point from dozens of available ones on our access point, thus working in zero interference with all other networks in the area.
Modern arc-shaped surface design
- Dust and water-proof
- Sensor touch buttons
- Anti-scratch cover technology
5Ghz Connection Point
- 5Ghz Wi-Fi access point to avoid any interference
- Detachable battery pack is easy to replace and charge 4 hours to fully charged. Can use 24 hours continuously, working time is 24 hours, 40 hours for standby
- Support up to 50pcs of microphone units per AP. Maximum can go up to 8units of AP
- USB recording and advanced noise cancellation technology to realize clearer recording
- Work 7x24 Hours
- Enterprise-class wireless AP, makes the signal strength of each linked WIFI unit easily viewed.
- Wide and less interference, can reach a radius of 30 meters, generally a radius of 25 meters, and connects 50 pcs wireless units
- With 410mm Flexible Gooseneck Microphone
EWDC-T/EWDD-T
Wireless Digital Discussion Chairman/ Delegate Unit- Stylish, low profile design with touchable interface
- Wireless communication, setting up all system in few minutes to be ready for using, and put them away in short time as well
- Built-in DC connector for power supply without battery
- Detachable battery pack is easy to replace and charge, 4 hours to fully charged. Can use 24 hours continuously internal high-fidelity loudspeaker
- Pluggable microphone and long range sound pickup ability, support different length of microphone. 2.23-inch OLED display with backlight, with status of signal and battery indication icon Head-set interface in both sides with volume adjust
- Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference
- Full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
- The unit showing time/date on the screen. Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically.
- All units can be configured as Chairman or Delegate unit through software settings based on model VIS-WDC -T.
EWCH1
Charger for battery- Three hours needed to fully charge
- MAX 8 pcs battery charging at one time
- Wide range power input: 100V~240V AC
- Buckle housing to prevent poor contact or dropping, light in weight for easy moving
EWBTY1
Rechargeable Battery pack- Long life and lasting stability of charging performance
- After fully charged it can use 24 hours
- Four hours needed to fully charge
- Efficient lithium batteries
EDCP2000
Full Digital Networked DSP Conference Processor- The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing
- One CAT5e cable to transmit up 64 channels audio and other signals.
- All microphone units support audio, ID independent output. Working with voice recognition system to achieve voice role separation.
- High-fidelity sound quality by lossless audio transmission technology, 48K audio sampling rate and 20Hz ~ 20KHz frequency response
- A single conference controller can realize the independent control and merging of 4 conference rooms, can handle the cascade of multiple conference controllers to realize the merging and separation of larger conference rooms (Optional).
- "Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
- The sensitivity of the unit microphone and 8 segment equalizer EQ adjusted independently.
- Conference controller can output 16 segment equalized EQ to achieve sound field adjustment; pressure limit, which can recognize the noise gate passed by human voice. AGC automatic volume gain control; AFC automatic feedback suppression and auto-mix technology.
- Sound output by separated zones function, each zone is automatically adjusted according to the volume of the position of the microphone, achieve longer distances pickup without whistle.
- Echo cancellation, remote two-way real-time call with another conference controller or another third-party video conferencing terminal.
- USB recording, controller monitor, advanced noise cancellation technology to realize clearer recording.
- System date, time management, and support count-down speech.
- Optional DANTE output module with other DANTE equipment used.
- Can drive 2x120W POE speaker, through extension main unit, support up to 16 POE speakers.
EAP4C
2.4GHz/5GHz Conference Access Point- Connect with the Wi-fi conference processor EDCP2000, or with the switch to extend more conference AP in the same system.
- Typical coverage range 30m
- Each AP can connect up to 50 conference units.
- Install on ceiling, wall or with stand rack mount
- 128 bits AES digital encryption technology, with WAP2 secure connection, MAC address filtering, SSID-hiding to prevent wiretapping and unauthorized access from delegate unit
HE20
HDMI/VGA to HDBaseT Wallplate- Support CV, YPbPr, VGA, DVI, HDMI video and audio signal transmission;
- Support the input source signal automatically switches the adaptive function;
- Support output resolution adjustable, up to 1080P @ 60;
- Support IR, RS-232 pass through function;
- Use CAT5 UTP cable to transmit (up to 100M).
- Support POC power supply function.
EPHD44/88/1616 UHD 4Kx2K HDMI Matrix
- Support 4/8/16 HDMI inputs and 4/8/16 HDMI outputs
- Support 3 GHz video formats up to 4k × 2k at 24 Hz/25 Hz/30 Hz, in addition to all mandatory HDMI 3D TV formats.
- HDCP and DVI compliant
- Supports 10/100Mbps Ethernet network connection
- Supports Baud rates up to 115200bps
- No loss and no delay HDMI Crosspoint switch
- Support HDMI 1.4 protocol
- Flexible control: front key panel with LCD, RS232 bus, TCP/IP control with RJ45 interface
- Input HDMI cable lengths up to 30 meters
- Mode saving function, can save and load 32 different scenes.
- Supports default HDMI EDID and learns the EDID of displays
- Easy installation with rack-mounting design
| Name | Description | Size | Type |
|---|---|---|---|
| Wireless DSP Conference System Brochure | Wireless DSP Conference System Brochure | 1.32 MB | |
| EWDC Wireless Microphone | EWDC Wireless Microphone | 0.18 MB | |
| EWCH1 Charger | EWCH1 Charger | 0.03 MB | |
| EWBTY1 Rechargable Battery | EWBTY1 Rechargable Battery | 0.04 MB | |
| EDCP2000 Full DIgital Networked DSP | EDCP2000 Full DIgital Networked DSP | 0.24 MB | |
| EAP4C Conference Access Point | EAP4C Conference Access Point | 0.46 MB | |
| HE20 HDBaseT Wallplate | HE20 HDBaseT Wallplate | 0.29 MB | |
| EPHD44 HDMi Matrix | EPHD44 HDMi Matrix | 0.29 MB |